How-to6 min read

Print a PDF as a Booklet: Page Order and Padding

PDF Booklet pairs pages into spreads so a double-sided print folds into a booklet: 8 pages give 8|1, 2|7, 6|3, 4|5. Page counts pad up to a multiple of 4.

By the PDF123 team Β· Updated 2026-11-13

Run the PDF through PDF Booklet, then print the result double-sided and flip on the short edge. The tool puts two source pages side by side on each output page, ordered so the printed sheets read correctly once stacked and folded in half, and pads the count with blank pages to a multiple of 4. In a test, an 8-page Letter PDF came back as 4 spreads of 1224 by 792 points (17 by 11 inches): pages 8 and 1, 2 and 7, 6 and 3, 4 and 5.

How do I print a PDF as a booklet?

  1. Upload the PDF to PDF Booklet and click Process. There are no options. From a script, the same operation is:

    curl -s -o booklet.pdf \
      -F [email protected] \
      https://pdf123.xyz/api/v1/general/booklet-imposition
    
  2. Open the result and look at the first spread. It should show the last page on the left and page 1 on the right.

  3. Print the result double-sided, flipping on the short edge, with scaling set to fit the page, onto landscape paper.

  4. Stack the printed sheets in the order they came out, fold the stack in half and staple along the fold.

The pages are placed, not turned into pictures: in the test, the text on every output page was still readable with pdftotext. The result is a new file and the original is untouched.

Which source pages land on which sheet?

These results are from one run against a local server on 2026-10-23, using generated Letter-size PDFs where page i carries the text "Page i of N". The output page count and size came from pdfinfo, and which page sits on which side was read from the position of that text on each output page with pdftotext -bbox. Every output page was 1224 by 792 points, which is two Letter pages wide.

Pages in the file Sheet Front (left, right) Back (left, right)
8 1 8, 1 2, 7
8 2 6, 3 4, 5
12 1 12, 1 2, 11
12 2 10, 3 4, 9
12 3 8, 5 6, 7

The tool writes the front and back of each sheet as consecutive output pages: 8 pages gave 4 output pages, which is 2 sheets, and 12 pages gave 6, which is 3 sheets.

The order holds together because of how the sheet is turned. The left half of a back lies behind the right half of its front when you turn the sheet over like the page of a book, which is the turn that flipping on the short edge of a landscape sheet makes. So page 1 is backed by page 2, and page 8 by page 7. Printer dialogs word this setting differently, so print the first sheet alone and fold it before you print the rest: page 1 should be on the outside, with page 2 behind it the right way up.

What happens when the page count is not a multiple of 4?

Blank pages are added after your last page until it is. In the same run, a 10-page file came back as 6 output pages, laid out exactly like the 12-page file with pages 11 and 12 empty, and a 5-page file came back as 4 output pages, laid out like an 8-page file with pages 6, 7 and 8 empty.

Pages in the file Output pages Sheets Output page 1 (left, right) Output page 2 (left, right)
10 6 3 blank, 1 2, blank
5 4 2 blank, 1 2, blank

In the 10-page run the two blanks were the outside of the back and its inside, both on the outermost sheet. In the 5-page run a third blank sat opposite page 3, on the second sheet. A file that is one page over a multiple of 4 gets three blanks. If you can choose, add or remove pages in the source so the count is a multiple of 4 and the blanks fall where you want them.

What to check before you print

  • Spread size. Each output page is twice the width of the first page. A Letter file gives 17 by 11 inch spreads, so fitting a spread onto Letter landscape paper scales each page to about 65 percent (11 inches over 17), and a 12 point font comes out at about 7.8 points. On A4 landscape it is about 69 percent. A printer's own margins make it a little smaller still. That is arithmetic from the page sizes, not a printer measurement.
  • Mixed page sizes. Pages are not scaled. In a test file with a Letter page, an A4 page, a Letter page and a landscape Letter page, both spreads were 1224 by 792, the size of two copies of the first page, so a page wider than the first one is wider than its half of the spread. Make the pages the same size before you run the tool.
  • No gutter. The two pages of a spread touch at the fold. The tool has no margin, gutter or binding-direction setting, and no allowance for the thickness of a long booklet, so keep the text of the source pages away from the inner edge.
  • A long file is one stack. All sheets are folded together. For a long document, cut it into parts with Split and make a booklet from each part.

Questions people ask

Does it shrink the pages to fit the paper?

No. Pages keep their size, and the sheet grows to hold two of them. Choose fit to page when you print, as in the numbers above.

Can I bind on the right, for a right-to-left language?

No. The tool only produces left-to-right booklets, with page 1 on the right of the first spread.

How is it different from Multiple Pages Per Sheet?

Multiple Pages Per Sheet and its preset 2 Pages Per Sheet keep reading order and do not fold. In the same run, 2 per sheet on the 8-page file gave 1 and 2, 3 and 4, 5 and 6, 7 and 8, which suits a stack of flat sheets but does not fold into a booklet that reads in order.

Why are some pages blank?

They were added to reach a multiple of 4. A 10-page file ends with two blanks and a 5-page file with three, as in the table above.

Open tool
Process in the browser β€” no watermark, files removed after the job.
Open tool